using industry leading vcsel technology and an advanced new light-engine design, the 3m active optical pluggable transceiver provides exceptional cost/performance value. the qsfp+ pluggable transceiver delivers 4 channels of bi-directional data at up to 10.5 gbps per channel for a total aggregate bandwidth of over 40 gbps while using a subtle 750mw of power per end. 3m ? active optical pluggable transceiver for qsfp+ applications key features ? low power consumption ? ibta certifed ? designed to sff 8436 qsfp+ ? supports 40gbase-sr4 and nppi specifcations per ieee 802.3ba-2010 d3.2 ? 4 channel x 10.3125 gbps with 64b/66b ? reliable 850nm vcsel ? serial i2c interface for user diagnostics ? optical lengths up to 100m using om3 ? hot pluggable ? industry standard mtp/mpo optical interface ? 3m active optical 2-year warranty regulatory ? fda cdrh - laser class 1m per iec 60825-1 ? fcc part 15, class b and ce emissions & immunity ? rohs compliant ? esd: C hbm 2000v (jesd22-a114-b) C air discharge 15kv (en610004-2) C contact discharge 8kv(en610004-2) applications ? high-performance computing clusters ? data center networks ? ib & gbe switches ? high-speed servers ? storage ? routers, hubs, load balancer
important notice all statements, technical information, and recommendations related to 3ms products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. before using this product, you must evaluate it and determine if it is suitable for your intended application. you assume all risks and liability associated with such use. any statements related to the product which are not contained in 3ms current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized offcer of 3m. warranty; limited remedy; limited liability. this product will be free from defects in material and manufacture for a period of two years from the time of purchase. 3m makes no other warranties including, but not limited to, any implied warranty of merchantability or fitness for a particular purpose. if this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3ms option, to replace or repair the 3m product or refund the purchase price of the 3m product. except where prohibited by law, 3m will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3m product, regardless of the legal theory asserted. 3m is a trademark of 3m company. 3 electronic solutions division interconnect products 6801 river place blvd. austin, tx 78726-9000 1-800-225-5373 www.3mconnectors.com please recycle. printed in usa ? 3m 2013. all rights reserved. 80-4000-7032-4 product specifcations module form factor qsfp+ protocols supported infniband qdr,ddr, sdr & 40g ethernet channels 4 channels, bi-directional channel data rate up to 10.5 gbps/channel operating optical wavelength 850nm ber <10e-12 operating case temperature 0 to +70o deg c storage temperature -20 to +85o deg c supply voltage 3.3v electrical interface 38-pin edge connector power consumption 1.5w max management interface serial, i2c optical interface 8 or 12f - mtp/mpo ordering information qsfp+ pluggable transceiver parts are available on customer drawing 78-5100-2570-9. please reference this drawing for additional details and availability. part number: 6B2A-0412A-0 ate ta puabe raeer r p aat 1 2 3 4 4 3 2 1 a b c d a b c d drawing number revision sht model size cage number drawing no. rev. title 3m copyright c 3m center st. paul, mn 55144 chkd date appvl date drft date mfg date chkd drft rev eco issue date and description distribution codes design reference next assembly division division code tolerances except as noted do not scale drawing scale millimeters inches .0000 .000 .00 .0 0 .0 .00 .000 angles third angle projection interpret per asme y14.5 - 1994 max surface roughness all surfaces marked only no yes this document and the information it contains are 3m property and may not be reproduced or further distributed without 3m permission, or used or disclosed other than for 3m authorized purposes. all rights reserved. 125 esd 2013 det. lists 78-5100-2570-9 a of .05 .10 .20 1 1 1 2 a 78-5100-2570-9 oh kim chye may 17,2013 qiao yun long saujit bandhu 1 a may 17,2013 qsfp+ optical 4x10gbps pluggable transceiver may 17,2013 may 17,2013 okc yl 004511 1 3m active optical pluggable transceiver for qsfp+ applications tm notes: 1. rohs compliant. see regulatory information appendix in "rohs compliance" section at www.3mconnectors.com (e1 & c1 apply) 2. meet specification sff-8436 unless otherwise noted, references to industry specifications are intended to indicate substantial compliance to the material elements of the specification. such references should not be construed as a guarantee of compliance to all requirements in a given specification." 3. material: houseing: zinc alloy finishing: nickel plating 4. ordering information: 6b 2 a - 04 1 2 a - 0 visit http://www.3mconnectors.com 8.50 13.68 16.40 free rotation 90 after assembly 1.00 0.60 5.20 18.35 12.53 71.1 +0.15 -0.05 1.100.18 (2x) 6b=pluggable transceiver 2=qsfp+ a=10g 04=4 channels 1=850nm optical wavelength 2=multi mode a=mpo optical interface 0=placeholder 1 2 3 4 4 3 2 1 a b c d a b c d drawing number revision sht model size cage number drawing no. rev. title 3m copyright c 3m center st. paul, mn 55144 chkd date appvl date drft date mfg date chkd drft rev eco issue date and description distribution codes design reference next assembly division division code tolerances except as noted do not scale drawing scale millimeters inches .0000 .000 .00 .0 0 .0 .00 .000 angles third angle projection interpret per asme y14.5 - 1994 max surface roughness all surfaces marked only no yes this document and the information it contains are 3m property and may not be reproduced or further distributed without 3m permission, or used or disclosed other than for 3m authorized purposes. all rights reserved. 125 esd 2013 det. lists 78-5100-2570-9 a of .05 .10 .20 1 1 1 2 a 78-5100-2570-9 oh kim chye may 17,2013 qiao yun long saujit bandhu 1 a may 17,2013 qsfp+ optical 4x10gbps pluggable transceiver may 17,2013 may 17,2013 okc yl 004511 1 3m active optical pluggable transceiver for qsfp+ applications tm notes: 1. rohs compliant. see regulatory information appendix in "rohs compliance" section at www.3mconnectors.com (e1 & c1 apply) 2. meet specification sff-8436 unless otherwise noted, references to industry specifications are intended to indicate substantial compliance to the material elements of the specification. such references should not be construed as a guarantee of compliance to all requirements in a given specification." 3. material: houseing: zinc alloy finishing: nickel plating 4. ordering information: 6b 2 a - 04 1 2 a - 0 visit http://www.3mconnectors.com 8.50 13.68 16.40 free rotation 90 after assembly 1.00 0.60 5.20 18.35 12.53 71.1 +0.15 -0.05 1.100.18 (2x) 6b=pluggable transceiver 2=qsfp+ a=10g 04=4 channels 1=850nm optical wavelength 2=multi mode a=mpo optical interface 0=placeholder rohs 2011/65/eu means that the product or part does not contain any of the substances in excess of the maximum concentration values (mcvs) in eu rohs directive 2011/65/eu. the mcvs are by weight in homogeneous materials. this information represents 3ms knowledge and belief, which may be based in whole or in part on information provided by third party suppliers to 3m. in the event any product is proven not to conform with 3ms regulatory information appendix, then 3ms entire liability and buyers exclusive remedy will be in accordance with the warranty stated below. unless otherwise noted, references to industry specifcations are intended to indicate substantial compliance to the material elements of the specifcation. such references should not be construed as a guarantee of compliance to all requirements in a given specifcation.
|
